Archive for September, 2009

Avoid costly mistakes!

Wednesday, September 30th, 2009

by guest author John Collins

Do you know where your sewer line, sewer cleanouts and septic tank are located?  What about your water lines, irrigation system, outdoor lighting, etc.? Knowing these locations could save you from considerable and unnecessary expenses. Public Blue Stake only marks public utilities up to your meter. Anything after the meter is your responsibility. Precision Locating starts where Blue Stake leaves off.

We give you the ability to plan BEFORE you put the shovel in the ground; saving you time, money and aggravation.

Planting trees? We give you the assurance you won’t plant that tree on top of your sewer line, potentially costing you hundreds of dollars to repair a collapsed line or root intrusion after a few years.

Adding a patio, addition or landscaping? Locating your sewer cleanouts or septic tank can ensure they don’t get buried below a patio or landscaping that will hinder the ability of your plumber to properly clean a blocked line or service your septic system.

Adding a swimming pool or spa? Locate all your water, sewer and electrical lines before digging starts.

Adding a built-in BBQ? Know where you can safely run the electrical, water, gas and/or drain lines.

SBA’s ARC Program for Small Business

Monday, September 21st, 2009

QwikBids Investigates

 

Many in the Valley are experiencing some of the same challenges staying afloat in these difficult times. Most contractors have found themselves changing the way they do business in order to prevent a sinking ship. They’re even experimenting and going outside their normal routine. This is what smart businesses do. But when it’s still not enough, there may be an alternative.

The U.S. Small Business Administration launched a new program aimed at assisting a struggling business stay afloat while recovery to our economy slowly progresses. So if you qualify, this may be the help you have been seeking.

In order to qualify, the business must have a qualifying small business loan and experiencing hardship financially. Aside from being an established business, financial statements must reflect it was profitable in one of the two years in operation. The business must also demonstrate a projected forecast showing it will once again meet the current and future loan payments for the next two years.

Do beware. If a business’s loans are severely delinquent, it is looked upon as a failing company, as cash flow and prior performance shows a loan would be a risk and not be good candidates for the ARC program.

As long as the fund is not depleted or by September 30, 2009 (whichever comes first) businesses that can demonstrate its need as a necessity are welcome to apply. Please click the following link to learn more, it may just be the solution your business needs to survive the recession.

http://www.sba.gov/recovery/arcloanprogram/index.html

Someone’s in the Kitchen

Tuesday, September 15th, 2009

QwikBids Investigates

 

With the economy in its current state, business as usual has not been business as usual for remodelers across the country. The economy is showing slow progress in the right direction, but we wanted to really know what consumers were still willing to spend money on when it came to renovations and remodeling. Just a phone call away, we asked several businesses in the Valley, and discovered that kitchen remodeling topped the list of higher-end spending. One remodeler remarked, “The general public isn’t really buying anything right now. As soon as they find their homes are worth half what they were worth a year ago, most of them give up.”

We asked how he was holding his business together under the strain of the economy. “The kind of requests I‘m getting usually involve garage doors, popping out a kitchen, and government jobs,” he says. It seems that many major remodelers and renovators are in the same boat.

Still, others contend the profits have been in the kitchen and bathroom. We’ll begin with kitchens, and where you should start.  As with all major upgrades to your home, we all know adding value, as well as energy efficiency, are major factors. So, there are many important decisions to make that come along with any major project, and we’ll talk about as many as possible here.

There are several major things to consider before beginning. It may be best to invest in a designer for the best results, but we have broken the kitchen renovation into seven categories:

  •   Windows
  •   Cabinets
  •   Appliances
  •   Sinks and fixtures
  •   Countertops
  •   Lighting
  •   Flooring

In many of our articles in the past, we have touched on a few of these seven items with many great tips. These would still apply; choosing the right materials and contractors remains the challenge. Yes, we’re going to say it! Make it painless by getting your contractors through the QwikBids website. They’re already verified as licensed and insured, and come complete with references. QwikBids saves consumers from having to check all of these things and allows time for more important things, like choosing the remodeling scheme that’s right for you.

Windows – The right ones make a difference in convenience, space, and appeal.

Cabinets – Choose according to your storage needs.

Appliances – Practicality and energy conservation should be deciding factors here.

Sinks and Fixtures – Water conservation and style should be thought out.

Countertops – Durability of material should be considered. You’ll get what you pay for.

Lighting – Energy efficiency and strategic placement.

Flooring – Material durability and type/amount of traffic should be the focus.

 

Price should hardly be the deciding factor when quality, durability and style are most important. Remodeling a kitchen should be carefully planned and realistic budgets should be factored in with this. A short cut today may mean grief tomorrow.

There are some things easy to overlook before even getting started on your remodeling project. Money is usually the biggest hurdle, as is getting a fair estimate on each of the items you are looking to change or upgrade. It would be a good idea to set aside a fund (the newest trend is an escrow account or service that acts as the go-between for paying the contractors). This protects both the consumer and the business you choose.

There are other things to consider, and one of them may be the wiring in your kitchen. Making certain there are adequate power outlets with the new scheme is easy to forget. Items such as this illustrate the importance of a well planned project before beginning. Trust us; having the power outlets not matching your new design will create a lot of headaches!

There’s one more piece of advice from QwikBids: When you begin the kitchen remodel, and it looks like a war zone in there, it would have been good to plan how you’re going to eat and store food!

How to Find the Best Value in a Contractor for the Best Price

Wednesday, September 2nd, 2009

QwikBids Investigates

 

With the recent upswing of people purchasing foreclosed homes, homeowners are finding that many of these deals come with an immense amount of work and are often experiencing trouble with contractors eager for a quick buck. To find the best value for the costs with contractors, keep these five things in mind:

  •   Determine what value really means to you – is it all about cost?
    •    It often depends on the work being done – some require license(s) and insurance
    •    Even the small projects must be licensed – it’s worth the cost to hire a licensed contractor      because  you could get into trouble for skipping this step
    •    Other things to consider – do you want someone within close proximity so they can come by quickly if needed?
    •    Do you want someone who’s been in business for a long time or are you willing to work with someone newer?
  •   The three most important questions to ask a service provider before hiring them:
    •    Ask for at least three references
    •    Ask for credentials – how were they trained and do they have the right certifications?
    •    Can they guarantee the work?
  •   How do you know if you’re really saving money?
    •    Get estimates from at least three comparable contractors (meaning comparable in value). Don’t compare apples to oranges
    •    Find out what materials are being used – are they the same quality from contractor to contractor?
  •   Get an agreement ahead of time – never assume!
    •    Everything must be in writing – don’t do anything over the phone or a handshake. This protects both the customer and the service provider
    •    An ethical service provider will always agree to a contract even if they don’t supply it themselves.
  •   What does it really mean when a contractor tries to sell you an “OEM” part?
    •    It was the original part that was in the equipment when you ordered it from the manufacturer
    •    A non-OEM part is generic and therefore, not always the same quality
    •    Non-OEM parts are fine to use as long as you’re aware of the difference upfront – ask the contractor to explain this to you

To request multiple bids for the products and services you need – at no cost – while remaining anonymous. Go to QwikBids today and make service providers compete for your business, and give back to the community while you’re at it!

Home Air Conditioning Repair and Service

Wednesday, September 2nd, 2009

QwikBids Investigates

Many take what seems to be the everlasting, indestructible A/C in our homes for granted. We go years without a single worry, and so don’t budget nor plan for its failure. When your A/C finally lets you down, the sudden cost and unplanned expense could be surprising. It’s not a matter of if you’re A/C will fail; it’s truly a matter of when. Here we’ll outline most causes, preventative measures, and proper maintenance.

Most A/C problems are a result of faulty installation, as well as poor service and maintenance. The compressor not coming on, a water leak, the air blowing but not cool and low airflow are just a few. If the unit doesn’t start at all, what can the homeowner do?

Before getting into a panic, try the circuit breakers or fuse box first. I can’t tell you how many folks have called out an A/C repair service, only to find it was as simple as throwing the switch back into position. It’s an expensive throw of a switch if the service call costs between $50 and $150 just for the technician to show up. Replacing a fuse can be an easy task as well, costing just a few dollars and a few minutes of time.

If an air conditioner turns itself on and off frequently, it could be a couple things. Either the unit is not the proper size to cool the area of home efficiently or the fan or compressor controls are worn out (in either of these cases it is wise to consult a professional). If the air isn’t cooling efficiently but the unit turns on, there could be a low refrigerant level, the coils are frozen over or the evaporator and/or condenser coils need to be cleaned.

Then, there are the filters. Normal airflow is restricted when these filters are not properly changed, and could considerably raise the amount of energy used to cool the home. Most of the time, something as simple as changing the filter or cleaning the coils can be done simply, with minimal cost. But if you find yourself questioning whether or not it would be safe to do so without causing further complications, it’s highly recommended to call in a professional.

If it’s a qwik response you’re looking for with the A/C, look no further than QwikBids. Licensed professionals are ready to bid on your service requests at just a moment’s notice. Don’t let the heat get to you. You’ll otherwise lose your cool when failure occurs!